There’s wisdom in repairing water pipes when you have the tools and expertise to do so. Plumbers typically charge a flat rate for a service call as well as a per-hour fee, so you’re sure to save a few bucks by doing the job yourself. For water pipe repair Chantilly homeowners and property owners often do minor repair work themselves.
Of course, you need to make sure that you know the basics and don’t damage the pipes in any way. The good news is that a simple water pipe repair is not a complex chore. There are three strategies for getting the task done, and none calls for high-level plumbing knowledge. The common DIY approaches are:
- Tape (with complete repair kit)
Here’s what you need to know about each of the methods:
Tape kits are available in most retail and specialty stores at reasonable prices. The advantage of using a tape kit is that you don’t have to hunt around for any extra items. Everything for a common water pipe repair job is included.
The first task is turning off the water supply, standard practice for virtually every DIY plumbing repair. Next, follow the information on the kit for activating the adhesive portion of the tape. Then, carefully wrap the fiberglass tape around the portion of the pipe where the leak is located.
One of the benefits of kits is that the tape is so flexible you can even apply it to bulky fittings, and it will still adhere to the surface of the pipe. Plus, some kits are priced a bit higher and include special tape that is self-adhering.
When using epoxy to repair a leaky water pipe, it’s essential to shut off the water source first and then drain the problem pipe of residual water. This is necessary so that the epoxy can do its job. It won’t adhere if the area is wet or dirty.
Always follow directions on the product container. Epoxy is a pretty simple substance to work with. Measure enough for the pipe leak or break. Then, knead the putty for a few minutes until it feels ready to apply. Please leave it in place according to the written directions. After that, test the seal by turning the water on and observing the result.
A clamp-and-patch kit can work well for larger jobs where the pipe is split open or completely ruptured. Turn off the water source. Use a metal file to smooth the pipe if there are rough spots. Carefully place the patch and clamps in place. Turn the water back on to test the integrity of the seal.
Getting the Help You Need
If you can’t do the job yourself, either because it’s too complex or you don’t have the time, contact a licensed plumber as soon as possible. Leaky water pipes can do a lot of damage to your home, so it’s imperative to take care of the situation as quickly as possible.
If you’re a homeowner, you probably know a thing or two about plumbing problems. Most property owners encounter common challenges like clogged drains, toilets that constantly run, odd noise coming from basement pipe systems, and much more.
It’s possible to fix many minor plumbing problems yourself, including things like slow-draining bathtubs and sinks, but a burst pipe needs professional attention from a licensed plumber.
Burst Pipes are Serious Problems
But what about a more serious event like a burst pipe? Unlike most of the more common plumbing problems, burst pipes can quickly turn into major expenses, create a huge mess, and end up making you wish you had attended to the situation when you first noticed it.
How do professional plumbers fix burst pipes in residential homes? Here’s a quick look at what a licensed contractor might do when they arrive on the scene in response to a “burst pipe” call from a homeowner:
- Cut the Electricity: One of the first things a plumber does is turn off the electricity in the area where the burst pipe is likely located. This is a general safety measure and is why many plumbers use lighted battery-powered headgear.
- Locate the Leak: Experienced contractors know where to look for typical bursts. This essential second step is where the real “plumbing” work begins because the contractor often has to get down into the home’s flooring or walls to identify the precise location of the leak.
- Shut Off the Water: Once the burst location is found, the plumber knows whether the entire home’s water supply or just a portion of it needs to be cut off. Regardless, the third major step of fixing a burst pipe involves shutting off the water supply to the damaged area.
- Do Necessary Repair Work: The fourth and final step pertains to the burst pipes themselves. An experienced contractor knows immediately whether the job will be a minor “fix it” situation or calls for replacing entire sections of pipe. Even the most talented DIY enthusiast should not attempt to replace broken pipes. This is what licensed plumbers do every day and why you should call them.
Like most plumbing problems, you can save a lot by taking care of a burst pipe as soon as possible. Typical expenses to repair a burst pipe can be surprisingly low if you catch the situation early. Waiting can be a costly move, especially if your home is older and is already in need of other plumbing work.
How Do You Know When a Pipe Has Burst?
It’s easy enough to understand that burst pipes are a top priority. But, how can non-professionals know whether their home is suffering from such a dilemma? Plumbers say that there are several common signs of a burst pipe in your home. Be aware that not all of them are obvious, so it’s essential to pay attention to any plumbing-related issues that come up.
When a pipe bursts, you’ll usually notice one or more of the following “symptoms.”
- Noises: Do you ever hear banging, clanking, or squealing noises coming from your home’s pipes? Anything but silence can mean there’s a problem afoot, and you should make a note of where the sounds are coming from and how often you hear them. Have a plumber check them out during an inspection.
- Smell: If your household water smells strange, “rotten,” or downright awful, the likely culprit is plumbing-related.
- Discoloration: In addition to odors, make a note of what your water looks like. Is it discolored in any way? If so, you’ve probably got a plumbing problem on your hands. Be careful never to drink, cook with, or bathe in discolored or smelly water.
- Low Pressure: A more subtle but still grave issue is low water pressure. A broken pipe often leads to a general reduction of household pressure.
- Stains: Do you have water stains on your walls, ceilings, or floors? Unless it’s the result of a spill or a roof leak you already know about, there’s a high probability that the staining is plumbing-related. Call a professional asap.
Get Professional Help
It’s important to contact a plumbing contractor Chantilly residents know and trust when your home suffers a burst pipe. Don’t wait. Even a short delay can turn a small, inexpensive repair job into a major expense and a huge headache.
Be attentive to the general health of your home’s plumbing system. If you notice any of the telltale signs noted above, call a plumber for a thorough inspection. When it comes to plumbing, being proactive is the key to keeping your home’s pipes in tip-top shape.
Most know what happens when pipes or a section of them freeze – lack of water supply, presence of cold drafts in the house, bubbling noise (a rare case), and an odorous stench (in case sewage pipes froze). However, many are not aware of what happens after they thaw out. So, is it happily ever after the pipes unfreeze? Probably not.
What Happens After Pipes Thaw Out?
Generally speaking, after unfreezing, the pipes exhibit complications that are not discernible while they were in a frozen state. Of course, the degree of damage to the pipes largely depends on the degree of their freezing and how they thawed out – natural or mechanical (more on this later on).
For an insider tip, know that if you have frozen pipes it is best to call a plumber and arrange a plumbing service for a later date – specifically, the beginning of spring. Know that you are not the only client whose pipes have thawed out. Therefore, plumbers will be very busy, and getting an immediate service might be difficult.
Going back to the topic, these are the possible scenarios that happen once your house’s pipes thaw out.
When pipes freeze, the liquid inside them expands. It can cause the linkages of the pipes to loosen, thereby causing leaks. Since ice does not drip, you cannot notice the presence of leaks while the pipes are still frozen. However, as the pipe thaws out, the ice returns to liquid form. It will then exit via the loose linkages of the pipes, and leaking becomes apparent.
Even more of a headache is that leaking does not happen to one section only. Leaking, which loose linkages cause, happens to several sections at once. There is no other way to get around except go for a pipe relining service (if the pipes are still serviceable) or go for pipe replacement service.
If the pipes’ linkages did not loosen, then the leaking might happen via the cracks on the pipe. Cracking occurs whenever frozen pipes suddenly unfreeze. Factors that cause this is the sudden increase in the environment’s temperature or immediate thawing using a high output heat gun or room heater.
Compared to loose linkages, cracks do not result in the gushing of water from the pipes. You can do a few things to minimize the problem that they cause.
The first thing that you can do is apply pipe sealants on the cracks to stop the dripping before the plumbers arrive to repair them. You can also place carpets or buckets under the cracks so that the water does not go to other house locations and cause unnecessary hassle.
Prepare To Move Out Of Your House
Often, the leaking that happens once the pipes thaw out is not limited to little water drips that can only wet the room where the pipes are. The leaking is as strong as the flow of water from a faucet. Therefore, resulting in pools of water that affect the whole house.
The severity of the leaking depends on the design of your house. For example, if your houses have two floors, and the frozen pipes are on the second floor, the first floor will probably rain with water. Hence, this will result in wetting the living room, the hallways, etc.
Prepare to move out when this happens. The leaking will not stop anytime sooner. Moreover, living in a wet house is dangerous. Due to the wetting, house appliances, especially those on the floor, might short circuit and cause fires while sleeping or doing something.
How To Thaw Frozen Pipes?
The pipes will thaw on their own once spring comes. However, waiting for spring is not ideal because prolonged freezing leads to further damage. Therefore, it is best to thaw the pipe early. These are the simple tricks to thawing with everyday items in the house.
Use The Blower
This method works once the pipe has only started freezing. The blower method is also people for the smaller pipes in the house. Any blower will do, but it is best to use the ones that have high heat output. Using a blower is that it gradually thaws out the pipe, which does not result in further damage.
Use A Portable Room Heater
The room heater has a similar effect to the blower. However, compared to the blower, the room heater is more suitable for thawing several sections of a pipe in the same location. The best portable heater to use is those that use infrared technology. It provides heating to the room and the pipes, thereby resulting in efficient and effective thawing.
Use Lukewarm Water
Using lukewarm water will do the job. Note the emphasis on the term lukewarm and not boiling. You do not want to use boiling water because it will cause the pipes to expand and develop cracks. To use lukewarm water, pour it on the frozen sections of the pipe at intervals. Also, get a bucket to catch the drips of lukewarm water that goes to the floor after pouring.
What To Do When The Pipes Thaw Out?
Turn off The Main Water Line
You might want to turn off the main water line to lessen the leaking effects of the pipes. By turning off the main water line, you cut the water supply on the pipes, thereby reducing the flow of water in them. It makes leaking more problematic because the drips will only come from the unfrozen water inside the pipes.
Pipes that thaw out can lead to more complicated things aside from affecting your house’s water supply. Thawing isn’t a sign that the problem is over. Once the pipes thaw out, they call for more attention and care. That’s why call our plumbing services Chantilly now. Our company will restore the original integrity of your pipes as if they were never frozen.
Many homeowners are used to drinking and using clean water to wash clothes and utensils. Some may take household water for granted until they notice discolored or rusty water in their systems. Unfortunately, there are many things he or she cannot fulfill without clean water.
No one will feel thrilled to see dirty or brown water when he or she turns on the faucets. The good thing is that he or she can still bring rusty water back to its former clean or clear liquid condition. Rust, an oxidized iron, is the biggest threat to many households in the USA.
Rusty water pipes are also a worry among many water experts. It’s a problem many supply water systems are going to face in the future. Despite many towns and cities across the United States spending billions of money cleaning water sources from rivers and lakes, rust is still a major problem.
The Environmental Protection Agency (EPA) requires that water leaving the city’s water plant be tested for bacteria commonly caused by rust. Microorganisms such as legionella and cryptosporidium thrive in degraded and rusty water systems. Contaminants like copper, arsenic, and lead are also common.
Finding the source of rusty water is not an easy undertaking for many homeowners in Arlington, Virginia. Corroded water should not be easily confused with anything else. This contaminated water has a bad or metallic smell, and that comes with a reddish-brown color.
Many homeowners may notice the bad odor and the brownish color, but finding the source of the problem is not that easy. Why fret when help is a stone throw away. This is a task best left to professionals, and he or she should not have any reservations seeking top plumbing services in Arlington VA.
Find the Source of Rusty Water- Step to Follow
No homeowner wishes to use dirty or rusty water to wash clothes, utensils, or for drinking purposes. Red flags will go up in his or her head, and it’s clear there is something that needs to be addressed, and as soon as possible. Working with a top professional plumbing services provider is a decision any homeowner in Arlington, VA, and surrounding areas will never regret.
This is an individual with the right plumbing skillsets, experience, and willpower to lend a helping hand. He or she will do anything possible to guide you in finding the source of rusty water. In light of this, here are a few steps to guide a homeowner in this pursuit. Have a look:
1. Do Small Tests
There are a number of tests one can do and ascertain the source of rusty water. Hardness soap test is common, but procedures such as kitchen faucet aerator test and toilet flush tank inspection test can save the day stress-free.
The test one chooses to work on will work perfectly. However, it’s best if he or she runs cold water for a few minutes into the system and ascertain where the colored water is coming from. Go on and run hot water and figure out whether the system one uses is delivering rusty water. The sample from the test will clear any doubts he or she has about the color and odor of the water.
2. Check for Failing Water Heater
If one uses hot water at home or has installed a water heater, he or she should test whether it’s the hot water that it’s rusty. Turn on the hot water tap and sample the color or odor of the water.
If the water is colored or has a bad smell, the water heater could be the problem. The system may be aging, or the homeowner hasn’t flushed it for a while. Sediments may have built up in the hot water tank, and they are now affecting the color and quality of the water.
3. Check for Aging Pipes
If rust is appearing in all the faucets in a home, the entire system needs immediate attention. This is a serious problem resulting from rusting pipes or residues in the pipe system.
Run water via the pipes and sample it for bad smell or discoloration. If the water is no longer clear and smelly, then the pipes are corroded, and water flowing through them will become contaminated.
4. Sample Rusty Water Appearing Out of Nowhere
If rusty water is present or appearing in all samples or out of nowhere, the problem is likely with the main water source. As a resident of Arlington, VA, and experiencing brownish water, the local pipe systems that supply clean water to homes may be the problem.
Check with the local government officials and inquire about the problem. Work with them and find a safer water source as rusty water is never safe for use.
Hire the Services of Top Plumbers
Iron or any related contaminants in water can be harmful. Rusty water can host bacteria that are dangerous to users. Contaminated water will expose users to different skin conditions as well as harm one’s internal organs.
If a homeowner notices a change in color or smell of the water, it’s wise to seek immediate professional help. Rusty water is a common problem in a lot of areas. The risk of using this water is real, and one should not accept to face such a problem.
If one experiences rusty or yellowed water at home, there is no need to fret but take immediate actions. The best way to solve this problem and stay safe is to seek top plumbing services. A homeowner will get an opportunity to work with well-trained, experienced, licensed, and certified plumbers.
A licensed plumber is the best to work with because this is an individual who knows the area well and eager to help. The plumber will take the necessary steps and find out where the rusty water is coming from. He or she will determine what needs to be replaced or repaired.
A reliable plumbing service provider will determine whether the pipes or water heater needs urgent replacement or repairs. He or she will monitor the issue and continue to address it until the homeowner has clean and safe to use water.
Don’t be discouraged and stress if it’s hard to find the source of rusty water. Get in touch today and work with plumbing professionals who know how to fix problems that cause rusty water.
Homeowners have to endure a lot each day and more so when it comes to their plumbing systems. One may experience many plumbing problems, but low water pressure is an issue he or she should not take lightly. It’s a common issue in many homes, even when the pipes are new or have just been repaired.
Low water pressure issues are easy to detect. One might notice showers that are so weak or the faucets can barely wash hands. These issues will leave a homeowner more aggravated and wondering what might be the problem.
Most water pressure problems in a home will present themselves in different ways. If this problem doesn’t go away after keeping an eye on the water pressure until it eventually drops too low, don’t stress anymore. Keep in mind that there is a low water pressure problem to deal with.
There are known causes of low water pressure in many homes in Arlington. And here are the common causes of low pressure in the water supply systems. Have a look:
Outdated and Faulty Fixtures
A home’s fixtures that have become faulty after prolonged use may lead to water pressure issues. Mineral buildups and debris can obstruct different fixtures in the house and prevent water from flowing freely to the designated supply system.
Clogged Water Pipes
Clogged pipes can obstruct the flow of water. It’s easy to notice such a problem. For instance, when one turns on a faucet, the water may spray out at a home pressure, but then start to flow with less pressure. Mineral deposits, rust, or other kinds of debris can accumulate on the pipes’ sides, restricting water flow.
Corroded Plumbing Systems
An entire home’s system of piping can be corroded, and it needs to be replaced. Even if a household uses the sturdiest pipes, they will not last a lifetime and will need to be replaced and solve the low water pressure issues.
Water Valve Issue
Most homes in Arlington have two main shut-off valves that control the water flow. One valve is in the house and the other at the meter. One of these valves may be fully turned off or partially, causing low water pressure issues.
Leaks are another common cause of low water pressure in many homes. If there is a crack or hole letting water flow out of the plumbing system, it will be hard for the water to reach the fixtures.
Solving Low Water Pressures Issues- What to Do
A homeowner struggling with low water pressure issues will do anything possible to have water aptly flowing in his fixtures. He or she may take the task to fix this problem. If one has the skillsets and expertise in solving such plumbing system problems, he or she can go on and DIY.
Unfortunately, most of these issues can be daunting and challenging to solve. If one decides to solve the problem himself, he might end up spending a lot of money and eventually fail to solve the main plumbing issues. Therefore, it’s best if these problems are left to professionals, and here is where top Arlington plumbers come in and save the day.
The plumber one picks will not just offer the best plumbing services, but impeccable advice on how to solve low water pressure issues. Here are some incredible tips to rely on and ensure water is correctly flowing on the fixtures.
Contact Your Immediate Neighbors
Always keep the first things first. Contact immediate neighbors and see whether they are experiencing the same problem.
If so, then the issue is with the city municipal water system. Call the respective authorities and see if the problem is coming from the street to the neighborhood.
Test the Pressure Manually
Even before calling the local water provider, take the initiative to test the pressure by hand. Start by determining whether all locations in the home have low water pressure. Check the faucets in the kitchen, bathroom, and backyard.
Alternatively, hook up the pressure gauge to an outside tap and turn on the water. Read the instantaneous readings, but make sure the shut-off valves at the water meter are fully open. A reading that is as low as 40psi is not ideal.
Ask the local water providers for pressure readings. Readings of 45 or 50 psi are ideal, and 80 psi and above is too high. If one confirms it’s a citywide pressure problem, then take the next helpful steps.
Clear the Clogs
Mineral buildups and debris clog pipes preventing free water flow to the respective fixtures. He or she can go on and clear the clogs by dissolving the deposits. There are impeccable ways to take care of clogs inside the plumbing systems once they are located in the systems.
For instance, open the zip-lock bag filled with baking soda and then vinegar over the faucet of choice. Tie it in place and leave it overnight to soak. Rinse the cleaned fixture fittings and put the fixture back together, and inspect how it’s working.
In an extreme case, a homeowner will be forced to replace the pipe section, causing this problem. Feel free to call plumbers to assess and correct the problem if stuck. These are professionals and will provide rewarding solutions.
Replace the Regulator
Many homes that depend on public water use a regulator located at the main meter or somewhere in the service line that enters the house. The regulator may be faulty, and the pressure will drop gradually, affecting every fixture in a home.
To solve this issue, reset or replace the regulator. If stuck and don’t know how to deal with the regulator, call a nearby plumber.
Look Over for Leaks
Leaks can result due to damaged and cracked pipes that restrict water from free-flowing to respective fixtures. Shut off all the main valves and faucets in the home and note down the water meter readings.
Return after a few hours and check the readings on the meter. A high reading in the meter is a clear sign there is a leak in the plumbing system.
Call a professional plumber and have the damaged pipes replaced. This is an excellent solution that will as well reduce the risk of corrosive pipes contaminating the water.
Install a Water Pressure Booster Pump
If one finds out the problem is not in the neighborhood and the water department can’t supply enough water, it’s time to invest in a water pressure booster pump. This new system will help increase the flow of the water the moment it reaches the homestead.
Hire a Plumber Deal with Low Water Pressure Today
Dealing with many plumbing system problems is never easy, and its best to work with a professional in the plumbing industry. Hiring the top plumbers is a decision he or she will never regret.
These are licensed, insured, experienced, and well-trained professionals in the industry and are always eager to lend a helping hand. Call today for a free quote and no-obligation consult.
The plumbing network is a silent network of soldiers that helps to keep you and your family members fresh and sweet smelling. According to research the ordinary person in homes spend around 60 to 120 minutes on their washroom, toilets, and bathrooms. Man, women, and men spend quite a bit of time in the kitchen washing their utensils and for other purposes including cooking. Hence, it is important to ensure that the plumbing network in your home in the best of condition. However, as our home ages, it is obvious that the plumbing network will also see some damages and wear and tear. While regular repairing, upkeep and maintenance may help prolong the life of the piping and plumbing system, there could be times when the plumbing system may need replacement, either partially or fully.
However, the whole plumbing network of the home will not come crashing down overnight unless there is a big natural disaster like storm, tsunami, or big fire. In this article, we will be looking at those classic signs and symptoms that could be pointing towards a failing and crumbling plumbing system. It would always be advisable to seek the counsel and advice of experienced plumber repair service Chantilly VA professionals. They will be able to offer proactive services that could help preempt costly and expensive replacements of the entire plumbing services. However, it would be interesting to have a look at those early symptoms that could point to the damage of the plumbing network. Usually, the damage starts from one place and it slowly spreads to the entire plumbing network.
We are listing down a few of the signs that could be ominous and could mean that the plumbing system could be falling apart if remedial action is not taken immediately.
1. Old Piping & Plumbing System
You may feel that your plumbing work is quite fine and doing well. However, like all fixtures and fittings, there is no doubt that plumbing networks also have a certain span of life.
Beyond which they will not be able to pull on. Therefore, you must consider the age of the plumbing network and the years in which they were constructed. For example, plumbing pipes constructed before the 1960s used galvanized steel and these tend to clog and corrode with time. Many homes also have used blue and grey polybutylene piping and they are also not free from problems. You can be sure that these types of piping systems are unreliable. Therefore, as a rule of the thumb, it would be better to regularly check plumbing networks that are more than 40 to 50 years old. The best option would be to have these old-style piping systems and plumbing networks replaced by the new ones because of obvious reasons.
2. Frequent Leak
You could also come across situations where you could see that the plumbing networks and pipes develop leaks. While leaks once in five or six years at some isolated place is not a problem, if it keeps happening every year or more than once in a year, then you can be reasonably sure that the particular stretch could be slowly getting damaged. Unless you can identify the location, segregate it and have it replaced with new pipes and plumbing systems, you could end up having a bigger problem. Repairing them repeatedly could be an expensive proposition and beyond a point repairing could turn out to be counterproductive.
3. The Age of the Piping & Plumbing Network
You also should have a clear understanding about the type of pipes you have in your home and the possible and probably lifespan of the same. You should regularly find out the condition of the piping and plumbing systems. It would not be possible for you to do the job and therefore you must take the help and assistance or professionals to do the diagnostic work and also go by the recommendations that they may have to offer. For example, water lines that are made from brass have a lifespan of around 40 to 70 years. Those with galvanized steel last for around 20 to 50 years. Copper water lines may have a life span of roughly around 50 years.
Cast iron and concrete drain lines normally should be good enough for 75 to 100 years. You should try and stay away from Polybutylene and polyvinyl chloride pipelines because they have a lifespan only for around 20 to 30 years. They are also prone to regular damages and regular repairs will also be required.
4. Consider Growth Factors
The growth of trees, plants and undergrowth could also determine the life of your plumbing system. If you have piping and plumbing systems running below your garden and backyard, make sure that they are checked regularly. Roots may cause damages to the same and unless you are regular in checking the same, you could end up facing big damage. It would be a good idea to cut down big trees if they are passing through your piping and plumbing system. A better idea would be to create a separate space for plumbing networks, and it should be away from the garden and backyard where you may have big trees growing and taking root.
5. Staining of Clothes
If you are living in a home with old piping systems using iron and steel, you must be on the lookout for red stains. These are basically corroded pieces of piping systems. If they keep coming out from your faucet on a regular basis, please be sure that there is something wrong with the network and you must have it checked as soon as possible. If needed, do not hesitate in replacing that portion of the plumbing system without which you may end up paying a much bigger price. If you are not sure how to go about it always take the help and assistance of professional plumbers. They have special tools and special ways and means to identify the situation and find the right solution.
We hope that we have been able to give a reasonably good insight into the various aspects of plumbing. The crux of the matter is that it is always better to look for early signs of wear and tear and take proactive action rather than being reactive. If you need any help on plumbing work of any type, please get in touch with us. We are sure we will be able to do what it takes to have the plumbing system inspected, diagnosed and if necessary, we also can replace it.
The sewer line is one of the biggest water lines in your home so it would be a big hassle if it gets damaged. Unfortunately, it is quite common for an old house to have a damaged sewer line. This is not something you should take lightly as it would be better to call a Chantilly plumbing professional when you sense something is wrong with your sewer line. After all, you know you would want to get it over with so you can get on with the next task. Here are 5 common sewer line problems:
The trees in your yard have underground roots and they can grow up to a point where they can damage several sewer lines. It is even possible the tree roots may damage your neighbor’s sewer lines. When that happens, they are going to get so angry. If the tree root has damaged the sewer line in such a way that it would be hard to repair it anymore, it is possible that the plumber would recommend that it would need to be replaced other than being fixed. Better follow a plumber because that person would know what to do next in a time of a crisis like that.
Grease or other objects may get in the way of the sewer line. The plumber will gently remove whatever it is that is blocking the water flow. When the sewer line is more than a decade old, it is normal to have something blocking the water flow. It is something you would want to get rid of as soon as possible though so things could get back to normal again. To prevent a blockage from happening in the future, one awesome idea would be to have the sewer line checked by a professional. You can tell that this person would be able to help prevent a blockage from happening in the future.
This is often caused by frozen ground. When it is winter, you know a lot of things are going to get wrong underground. When the pipes are broken, they need to be replaced right away. You know they can’t function forever so better get the opinion of the plumber whether they need to be replaced or fixed. When the plumber says you will save more money when they are replaced, then that is the path you must take for your own sake.
Putting a pail under the leak is not the solution to this problem. Better call a Chantilly plumbing professional because that person will know what to do with this problem before it becomes something much worse. The joints must be joined correctly so you know that there won’t be anything happening wrong in the future. Another way to prevent this from happening in the future would be to clean the sewer line often. You know it is going to be a lot of hard work, but it needs to be done so that problems won’t arise in the coming years.
When the pipes were made using low-quality material, then it will only be a matter of time before it deteriorates. You know you must do something to fix that problem so better change the pipes to something that is made from PVC. If you do that, then there is a huge chance that problem won’t happen again in the future. Everyone knows PVC is the best material for pipes so you should not think about getting pipe that is made of other materials as the amount of money you save won’t be worth it.
A good plumbing company would know what to tell you in the event of a sewer line problem. Hence, the next thing to do would be to call Doherty Plumbing as we are a company who has gotten nothing but great reviews during the long time we have been in the industry. We would not have lasted that long if we did not do well with all the tasks given to us. Our customer service team would want nothing more than to help you with your plumbing problem. What’s more, we are already equipped with all the needed materials to get the job done in a few hours.
The bathroom is one of the most used areas in a home, thus it is not uncommon for a toilet to become clogged with use over time. This can be caused by several things, all of which are easily controlled if addressed immediately. If a problem arises that cannot be handled without professional assistance, the best Arlington plumbing company has a reliable, affordable team readily available to fix whatever problem a homeowner faces. Here are some of the most common reasons as to why your toilet won’t flush, and what can be done about it.
- Something is blocking the pipe
This can be a number of things, as families with younger children may have to deal with toys being flushed, or could be other objects that may have accidentally fallen into the toilet bowl, such as cell phones, watches, etc. This is common but can lead to blockage and clogging that will backup the normal flow of water. Oftentimes, a traditional, high quality plunger can dislodge the flushed object through the use of suction, or at least will lower the water level enough so that one can attempt to reach the object by hand. Another option is to use a toilet auger which clears the pipe through, but if the object remains lodged, then calling a plumber is the next step.
- The lift chain is damaged and/or disconnected entirely
Another common issue is dealing with a damaged or disconnected lift chain, which opens and closes the toilet’s flapper when it is flushed. Adjusting the length of the chain, or how much slack it has, can be done easily by an individual without the use of plumbing services, as it is a common problem that occurs with use over time. Repairing of the chain may be needed, if the chain is at all damaged, and this can be done individually or with professional assistance from a qualified plumbing technician.
- The toilet has a damaged flapper
This, again, often comes as a result of use over a period of time and affects the flowing of water into the toilet bowl when flushing occurs. The flapper can become warped, bent, or undergo further damage and will cause the water to not refill following flushing. Replacing it is easy to do and not costly, and if someone is uncomfortable replacing it on their own, professional help is recommended but not necessary.
- The water is not being refilled properly
If the water level in the tank is too low, the toilet will not flush properly, and this can come as a result of a turned off valve or another issue. Ensure that the tank is filled to one inch below the overflow tube, turning the valve on and watching as this is done.
- Damaged Overflow tube
A damaged or cracked overflow tube will cause the water to not refill the tank following flushing, and instead flow into the overflow tube. Check to ensure the tube is performing properly and is not damaged. If it is, replacing is a simple task and is inexpensive.
All of these are common issues that every homeowner faces at some point, all of which can be fixed at home or with the help from Doherty Plumbing can help you with any plumbing problem that is too difficult to deal with alone .
- What to Do if a Pipe Bursts February 8, 2022
- How Can Commercial Buildings Reduce Water Usage? January 6, 2022
- 6 Ways to Prevent Pipes from Freezing This Winter December 8, 2021
- 7 Things You Should Keep in Mind When Hiring a Plumber November 18, 2021
- 3 Reasons to Install New Gas Piping October 27, 2021